Sanyo PLC WM5500L Owner's Manual

Contents

41Computer InputImage adjust MenuPress the MENU button to display the On-Screen Menu.Use the Point ▲▼ buttons to select Image adjust andthen press the Point ► or the SELECT button.1 Use the Point ▲▼ buttons to select the desired itemand then press the SELECT button to display theadjustment dialog box. Use the Point ◄► buttons toadjust the setting value.Note:When White balance Red, Green or Blue isadjusted, Color temp. will change to Adj..Press the Point ◄ button to decrease the contrast; press the Point► button to increase the contrast (from 0 to 63).Press the Point ◄ button to decrease the brightness; press thePoint ► button to increase the brightness (from 0 to 63).Press the Point ◄ button to lighten red tone; press the Point ►button to deepen red tone (from 0 to 63).Press the Point ◄ button to lighten green tone; press the Point ►button to deepen green tone (from 0 to 63).Press the Point ◄ button to lighten blue tone; press the Point ►button to deepen blue tone (from 0 to 63).Use the Point ◄► buttons to select the desired Color temp. level(XLow, Low, Mid or High).Use the Point ◄► buttons to adjust the gamma value to obtain abetter balance of contrast (from 0 to 15).Press the Point ◄ button to decrease the sharpness of the image;press the Point ► button to increase the sharpness of the image(from 0 to 31).Contrast 32Brightness 32Color temp. HighRed 28Green 32Blue 35OffsetSharpness 8Gamma 8ResetStoreUse the Point ◄►buttons to adjust thesetting value.Selected Image modePress the Point ◄ button to lighten red/green/blue tone of the blacklevel of an image; press the Point ► button to deepen red/green/blue tone of the black level of an image.Image AdjustmentContrastBrightnessColor tempWhite balance (Red)White balance (Green)White balance (Blue)Offset(Red/Green/Blue)SharpnessGamma