Sanyo PLC-XE30 Owner's Manual

Contents

13Part Names and Functions1 2 3To insure safe operation, please observe the following precautions:● Use (2) AA or LR6 type alkaline batteries.● Always replace batteries in sets.● Do not use a new battery with a used battery.● Avoid contact with water or liquid.● Do not expose the remote control to moisture or heat.● Do not drop the remote control.● If the battery has leaked on the remote control, carefully wipe the case clean and install newbatteries.● Risk of explosion if a battery is replaced by an incorrect type.● Dispose of used batteries according to the instructions.Open the batterycompartment lid.Install new batteries intothe compartment.Replace thecompartment lid.Two AA size batteriesFor correct polarity (+and –), be sure batteryterminals are in contactwith pins in thecompartment.Point the remote control toward the projector(Infrared Remote Receiver) when pressing anybutton. Maximum operating range for theremote control is about 16.4’ (5m) and 60° infront of the projector.Operating Range30°30°Remote Control Battery Installation16.4’(5 m)Part Names and Functionshttp://www.pureglare.com.au