Sanyo PLC-XE30 Owner's Manual

Contents

40Video InputTo store the adjusted data, select Store and press theSELECT button. Select a level from Image 1 to 4 with thePoint ed buttons and press the SELECT button. Aconfirmation box will appear and then select [Yes].Stored data can be called up by selecting "Image" in theImage Level Selection on page 38.Image Level MenuMove the red framed pointer toan image item to be set andthen press the SELECT button.To reset the adjusted data, select Reset and press theSELECT button. The confirmation box will appear and thenselect [Yes]. All adjustments will return to their previousfigures.ResetStoreExit the Image Adjust Menu.Quit✔Note:Noise reduction and Progressive cannot be selected when 480p,575p, 720p, 1035i, or 1080i is selected. (p37)StoreitemInterlaced video signal can be displayed in a progressivepicture. Select one of the following.Off...........disabled.L1............Select “L1” for an active picture.L2............Select “L2” for a still picture.Film .........Select “Film” for watching a film. With thisfunction, the projector reproduces picturesfaithful to the original film quality.ProgressiveNoise reductionNoise interference on the screen can be reduced. Selectone of the following to get smoother images.Off...........disabled.L1............lower reductionL2............higher reductionThe confirmation boxwill appear and thenselect [Yes].Press the Point 7 8 buttons to obtain better balance ofcontrast. (From 0 to 15.)GammaPress the Point 7 button to soften the image and the Point8 button to sharpen the image. (From 0 to 15.)Sharpnesshttp://www.pureglare.com.au