37Video InputPress the MENU button to display the On-ScreenMenu. Press the Point 7 8 buttons to move the redframed pointer to the AV System Menu icon.1Video System SelectionAV System Menu (Video or S-Video)AV System Menu (Component)Press the Point ed buttons to move the red arrowpointer to the system that you want to select and thenpress the SELECT button.2If the projector cannot reproduce proper video image, it isnecessary to select a specific broadcast signal formatamong PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.Move the pointer to asystem and press theSELECT button.PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-NThe projector automatically detects incoming video signal,and adjusts itself to optimize its performance.If the projector cannot reproduce proper video image, it isnecessary to select a specific component video signalformat among 480i, 575i, 480p, 575p, 720p, 1035i, and1080i.AutoCOMPONENT VIDEO SIGNAL FORMATVideo or S-VideoComponentThe projector automatically detects incoming video system,and adjusts itself to optimize its performance.When Video System is PAL-M or PAL-N, select systemmanually.AutoAV System Menu iconSelected system isdisplayed.Move the pointer to asystem and press theSELECT button.AV System Menu iconSelected system isdisplayed.✔Note:The AV System Menu cannot be selected when selecting RGB(Scart).Video Inputhttp://www.pureglare.com.au