Sanyo PLC-XE30 Owner's Manual
                                                                    | |
Contents
|
16InstallationConnecting to a ComputerONONS-VIDEO INMONITOR OUTCOMPUTER IN 2 /COMPUTER /COMPONENTAUDIO INRVIDEO IN L(MONO)(VARIABLE)AUDIO OUTCOMPUTER IN 1/ COMPONENT INUSB SERVICE PORTRESETCables used for connection• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)•USB Cable ✽• Audio Cables (Mini Plug: stereo) ✽(✽ = Not supplied with this projector.)External Audio EquipmentVGA cableUSB cable ✽Audio cable(stereo) ✽ Audio cable ✽(stereo)Monitor OutputorMonitor InputUSB portAudio OutputUSBC O M P U T E R /COMPONENTAUDIO INAUDIO OUT(stereo)Audio InputCOMPUTER IN 2/MONITOR OUTWhen connecting the cable, the powercords of both the projector and theexternal equipment should bedisconnected from AC outlet.✔Note:• Input sound to the COMPUTER / COMPONENT AUDIO INterminal when using the COMPUTER IN 1 / COMPONENT IN andthe COMPUTER IN 2/MONITOR OUT terminal as input.• When connecting the AUDIO OUT to external audio equipment,the projector's built-in speaker is disconnected.• When the cable is of the longer variety, it is advisable to use theCOMPUTER IN 1 / COMPONENT IN and not the COMPUTER IN2 / MONITOR OUT.• See p65 for ordering optional parts.Monitor OutputCOMPUTER IN 1/COMPONENT INVGA cableThis terminal is switchable. Set up theterminal as either Computer input orMonitor output. (See Page 45.)http://www.pureglare.com.au |
Related manuals for Sanyo PLC-XE30
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine