Sanyo PLC-XE30 Owner's Manual

Contents

33Computer InputStoreExit the Image Adjust Menu.QuitTo store the adjusted data, select Store and press theSELECT button. Select a level from Image 1 to 4 with thePoint ed buttons and press the SELECT button. Aconfirmation box will appear and then select [Yes].Stored data can be called up by selecting "Image" in theImage Level Selection on page 31.Move the red framedpointer to any ofImage 1 to 4 whereyou want to set andthen press theSELECT button.The confirmationbox will appear,then select [Yes].Store itemPress the SELECT buttonat this item to store theadjusted data.This projector has the picture screen resize function, which enables you to customize the image size.Press the MENU button to display the On-ScreenMenu. Press the Point 7 8 buttons to move the redframed pointer to the Screen Menu icon.1Move the redframed pointer to thefunction and press theSELECT button.Press the Point ed buttons and move the red framedpointer to the function that you want to select andthen press the SELECT button.2Screen MenuScreen Menu iconScreen Size AdjustmentWideProvide the image to fit the screen size.NormalTrueProvide the image in its original size. When the originalimage size is larger than the screen size (1024 x 768), thisprojector enters panning mode automatically. Pan theimage with Point ed 7 8 buttons. When adjusted, thearrows will turn red. When reached to the correction limit,the arrows will disappear.Provide the image to fit wide video aspect ratio (16 : 9) byexpanding the image width uniformly. This function can beused for providing a squeezed video signal at 16 : 9.Full screenProvide the full screen image.✔Note:• This Screen Menu cannot be operated when720p(HDTV), 1035i (HDTV), or 1080i (HDTV)is selected in the PC System Menu (p27).• PLC-XE30 cannot display any resolution higherthan 1600 X 1200. If your computer’s screenresolution is higher than it, reset the resolution tothe lower before connecting to the projector.•The image data in other than 1024 x 768 ismodified to fit the screen size in initial mode.• True, Full screen, and Digital zoom +/– cannotbe selected when 480i, 575i, 480p, or 575p isselected in the PC System Menu (p27).Computer Inputhttp://www.pureglare.com.au