Sanyo PLC-XE30 Owner's Manual

Contents

55Maintenance and CleaningDisconnect the AC power cord before cleaning.When the projector is not in use, replace the lenscover.132Follow these steps to clean the projection lens.Cleaning the Projector CabinetDisconnect the AC power cord before cleaning.1Softly wipe the projector body with a soft, dry cleaningcloth. When it is heavily soiled, use a small amount ofmild detergent and finish with a soft, dry cleaningcloth. Avoid using an excessive amount of cleaner.Abrasive cleaners, solvents, or other harsh chemicalsmight scratch the surface.2Follow these steps to clean the projector cabinet.When the projector is not in use, put the projector inan appropriate carrying case to protect it from dust andscratches.3Softly wipe the projection lens with a cleaning cloththat contains a small amount of non-abrasive cameralens cleaner, or use lens cleaning paper or acommercially available air blower to clean the lens.Avoid using an excessive amount of cleaner. Abrasivecleaners, solvents, or other harsh chemicals mightscratch the surface.Cleaning the Projection LensMaintenance & Cleaninghttp://www.pureglare.com.au