Sanyo PLC-XE30 Owner's Manual

Contents

34Computer InputWhen the Digital zoom + is selected, the On-Screen Menuwill disappear and the message “D. zoom +” will bedisplayed. Press the SELECT button to expand the imagesize. And press the Point ed 7 8 buttons to pan theimage. The Panning function can work only when theimage is larger than the screen size.A projected image can be also expanded by pressing theD.ZOOM ▲ button on the remote control.To exit the Digital zoom +/– mode, press any button exceptthe D.ZOOM ▲▼ buttons, SELECT, and Point button.Digital zoom +When Digital zoom – is selected, the On-Screen Menu willdisappear and the message “D. zoom –” will be displayed.Press the SELECT button to compress image size.A projected image can be also compressed by pressing theD.ZOOM ▼ button on the remote control.Digital zoom –To return to the previous screen size, select a screen sizefrom the Screen Size Adjustment or select an input sourcefrom the Input Source Selection (p26) again, or adjust thescreen size with the D.ZOOM ▲▼ buttons.Remote ControlD.ZOOM + buttonPOINT buttonsSELECT buttonD.ZOOM - buttonFor zooming in and out the images✔Note:•The panning function may not operate properly ifthe stored Mode in the PC Adjust Menu is used.(p30)•The minimum compression ratio can be limiteddepending on the input signal or when theKeystone function is working.• True, Full screen, and Digital zoom +/– cannotbe selected when 480i, 575i, 480p, or 575p isselected in the PC System Menu (p27)•Digital zoom +/- cannot be selected when Fullscreen or True is selected.http://www.pureglare.com.au