27Computer InputThe Auto PC Adjustmentfunction operates to adjustthe projector.PC System MenuThe PC System Menu iconSelected system isdisplayed.Systems on this dialog boxcan be selected.Press the MENU button to display the On-ScreenMenu. Press the Point 7 8 buttons to move the redframed pointer to the PC System Menu icon.Press the Point ed buttons to move the red arrowpointer to the system that you want to set, and thenpress the SELECT button.12PC System MenuCustom Mode (1~5) set in thePC Adjust Menu. (p28, 30)PC system can also be selected manually.Computer System SelectionThis projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA orUXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, thisprojector automatically detects the signal format and tunes to project a proper image without any additionalsetting. (Signal formats provided in this projector is shown on page 63 )One of the following messages may appear when:The projector cannot recognize the connectedsignal conforming to the provided PC Systems.The message "Auto" will be displayed on the PCSystem Menu icon and the Auto PC Adjustmentfunction will work to display proper images. Ifthe image is not projected properly, a manualadjustment is required. (p29, 30)There is no signal input from computer. Checkthe connection between your computer and theprojector. (See " Troubleshooting" p58)Auto-----The preset system is manually adjusted in thePC Adjust Menu. The adjusted data can bestored in Mode 1~5. (p29, 30)Mode 1PC Systems provided in this projector is chosen.The projector chooses a proper system providedin the projector and displays it.SVGA 1Selecting Computer System Manually*Mode 1 and SVGA 1 are examples.Computer Inputhttp://www.pureglare.com.au