Sanyo PLC-XE30 Owner's Manual

Contents

6Safety InstructionsUSE CAUTION IN CARRYING ORTRANSPORTING THE PROJECTOR–Do not drop or bump the projector, otherwise damagesor malfunctions may result.–When carrying the projector, use a suitable carryingcase.–Do not transport the projector by using a courier ortransport service in an unsuitable transport case. Thismay cause damage to the projector. To transport theprojector through a courier or transport service, consultyour dealer for their information.–Do not put the projector in a case before the projectoris cooled enough.Moving the ProjectorWhen moving the projector, replace the lens cover andretract the adjustable feet to prevent damage to thelens and cabinet. When the projector is not in use foran extended period, put it into a suitable case to protectthe projector.When handling the projector, do not drop, bump,subject it to strong forces or put other things on thecabinet.Do not tilt the projector more than20 degrees from side to side.Do not point the projector up toproject an image.Do not point the projector downto project an image.Do not put the projector on eitherside to project an image.Install the projector properly. Improper Installation mayreduce the lamp life and cause a fire hazard.Installing the Projectorin Proper PositionOpenings in the cabinet are provided for ventilation andto ensure reliable operation of the product and toprotect it from overheating, and these openings mustnot be blocked or covered.CAUTIONHot air is exhausted from the exhaust vent. Whenusing or installing the projector, the followingprecautions should be taken.– Do not put any flammable object or spray can nearthe projector, hot air is exhausted from the ventilationholes.– Keep the exhaust vent at least 3’(1m) away from anyobjects.– Do not touch a peripheral part of the exhaust vent,especially screws and metallic part. This area willbecome hot while the projector is being used.– Do not put anything on the cabinet. The materialsput on the cabinet will not only get damaged but alsocause fire hazard by heat.Cooling fans are provided to cool down the projector.The fans' running speed is changed according to thetemperature inside the projector.Air Circulation20˚20˚Air IntakeVentExhaust VentExhaust Vent(Hot air exhaust) Air IntakeVenthttp://www.pureglare.com.au