Sanyo PLC-XE30 Owner's Manual

Contents

28Computer InputAuto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical toconform to your computer. Auto PC Adjustment function can be operated as follows.Move the red framedpointer to the Auto PC Adj.item and press the SELECTbutton."Please wait..." messagewill appear while Auto PCadjustment is in process.PC Adjust MenuPC Adjust Menu iconTo store adjustment parametersAdjustment parameters from Auto PC Adjustment can bememorized in this projector. Once parameters arememorized, the setting can be done just by selecting Modein the PC System Menu (p27). See “Store” on page 30.✔Note:• Fine sync, Total dots, Horizontal, and Vertical of some computerscannot be fully adjusted with this Auto PC Adjustment function.When the image is not provided properly with this operation,manual adjustments are required. (p29, 30)• The Auto PC Adjustment cannot be operated when 480i, 575i,480p, 575p, 720p,1035i, or 1080i is selected in the PC SystemMenu(p27)Auto PC AdjustmentPress the MENU button to display the On-ScreenMenu. Press the Point 7 8 buttons to move the redframed pointer to PC Adjust Menu item.12 Press the Point ed buttons to move the red framedpointer to Auto PC Adj. item and then press theSELECT button twice.Auto PC Adj.Menu OperationThe Auto PC adjustment function can be operated directly bypressing the AUTO PC button on the remote control unit.Remote Control UnitAUTO PC buttonDirect Operationhttp://www.pureglare.com.au