11 – Machine Control/Location—DTRS devices90 TASCAM DM-24 Reference ManualDTRS mixerIn addition to the screen just described, there is anon-screen output mixer which controls the internalmixer of up to two DTRS units.This is selected as a separate item in the list ofdevices to be controlled by the DM-24 (DA-98HRMix). If this item is not added to the list of controlla-ble devices, it will not be possible to make thesemixer settings described here, even if the appropriateDTRS units have been added to the list of controlla-ble devices.See the DTRS documentation for full details of howthe mixdown mode functions with each model.If more than one DTRS unit has been displayed inthis way, the screen is split into two, with two “toprows”, etc.The INPUT SELECT section at the top of each half-screen allows the assignment of sources to channels.Use the cursor keys, dial, and ENTER key to changethese assignments. For DA-78HR units, these can beselected as Track (T), Digital (A) or Analog (A) andfor DA-98HR units, they can be Track (T), Digital (D)or Slot (S).The on-screen MIX DOWN button controls the mix-down mode of the DTRS unit.In the first row of each half-screen, POD 1 allows thesetting of a master PAN value, with a SET button toconfirm the setting for a scope set by POD 2 (ALL,ODD, EVEN, 1-8 and 9-16).Also in the first row, POD 3 is used to control theoverall output master level for the first eight channels(the first unit), and POD 4 does the same for the sec-ond eight channels (the second unit).The PODs in the remaining rows of the half-screenare used to control the pan positions of the outputs.The master layer faders and MUTE keys are used tocontrol the DTRS mixer when this screen is active(modules 1 through 8 control the first unit, and 9through 16 control the second unit). While this isscreen active, and the master layer is selected, theMASTER indicator flashes, as do the MUTE keys ofthe modules.