11 – Machine Control/Location—MIDI controllersTASCAM DM-24 Reference Manual 93MIDI controllersThe PODs of the DM-24 can be used to send MIDIControl Change messages as described here.The most common controllers are listed here, and thecursor keys and PODs are used to set the values ofthese controllers on the selected channel.The selected channel is shown at the top of thescreen, and is the same as the ID selected on thesetup page.Control Functions available in this screen are:MIDI fadersIn the MIDI faders screen, the master layer of theDM-24 faders is used to control MIDI ControlChange values, on the same controller, for all sixteenMIDI channels:The MIDI Control Change number can be selectedand set in this screen. As the example here shows,this may be used most often with MIDI volume(Control Change 7) in order to provide an easy wayof independently controlling the volume of up to 16MIDI devices connected to the DM-24.No. Control Function No. Control Function01 Modulation 64 Sustain02 Breath 67 Soft04 Foot 16 Gpc111 Expression 17 Gpc218 Gpc307 Ch.vol 19 Gpc408 Balance 5 Porto Time10 Pan 84 Porto Ctrl12 Eff Ctrl 99 Non Reg13 Eff Ctrl 101 Reg
