11 – Machine Control/Location—DTRS devices92 TASCAM DM-24 Reference ManualDA-38The DA-38 does not include quite so many options asthe DA-98.Input monitoring is not possible, but track copying isavailable in the same way as for the DA-98.Since the DA-38 does not include a timecode genera-tor, the range of options available in the TC/SYNC sec-tion is more limited, being restricted only to settingthe machine offset value.The clock sources are restricted to internal and word.DA-88This provides the following facilities as shown on thescreen here:Similar to the DA-38, digital input can be switchedon and off (that is, between analog and digitalinputs).The track delay time can be set individually, as wellas a global setting. Use the PODs here to make theadjustment.If an SY-88 card is fitted in the DA-88, the timecodesettings can be made in the same way as for the DA-98 timecode.Punch preroll time only can be set (postroll cannot beset).Clock source options are restricted to internal, videoand word.
