Tascam DM-3200 Release Notes

Also see for DM-3200: Quick reference Owner's manual Manual Software guide Application guide

DM-3200 Release Notes1 TASCAM DM-3200 Release Notes V1.50Assigning parameters to rotary encodersYou can assign parameters to the rotary encoders using thefour encoder mode keys (please refer to the “Encoders”section on page 20 in the Owner’s Manual).In the previous versions of DM-3200, parameters werepre-assigned as indicated next to each of the encoder modekeys. In Version 1.20 you can select which parameter is tobe controlled by which of the encoder mode keys.Figure 12: OPTION>ENCODER MODE screeParameters are assigned on the ENCODER MODE screen,which is a sub-screen newly added to the OPTION screen.1 Press the OPTION key to display the OPTION screen,then use the POD 4 knob (or press the OPTION keyagain) to display the ENCODER MODE sub-screen.2 Use the CURSOR key to select the encoder modekey to assign a parameter from the list in the EDITTARGET SELECT section.Starting at the top, row numbers 1-4 represent the numbersof the encoder mode keys.“NONE” means that the encoder key is pressed by itself,“SHIFT+” means that the encoder key and the SHIFT keyare pressed simultaneously, and “CTRL+” means that theencoder key is pressed together with the CTRL key.For example, if you want to assign a parameter to “thetopmost encoder mode key when it is pressed with the SHIFTkey,” select the field where row “1” and “SHIFT+” cross.The encoder mode which is currently assigned to theselected encoder mode key will be highlighted in theENCODER MODE SELECT section at the bottom of the screen.3 Using the JOG/DATA dial, select the encoder modeto be assigned to the highlighted encoder mode key,from the ENCODER MODE SELECT section.NOTEDepending on whether the surround mode is set toSTEREO or not, the options given in the ENCODERMODE SELECT section differ.4 Press the ENTER key.Assignment of the parameter is now complete andwill be displayed in the EDIT TARGET SELECT section.NOTEYou need to perform the corresponding encodermode key operation in order to assign the set param-eter to a rotary encoder.Cascade connectionDM-3200 Ver1.20 allows you to make a cascade connection between two DM-3200 units.Cascade connection overviewTwo DM-3200 units that are connected by a cascadeconnection can be operated as though they are one mixer.STEREO buss, BUSS 1-16, AUX buss 1-8, and SOLO busscan be shared when the sharing function is set to ON inthe CASCADE screen.The audio clock is shared by the two units.••Timecode is shared to synchronize the two units.Various settings and operations can be interlockedbetween the two units. Please refer to the “Settings andOperations that can be interlocked” section on page 9 ofthis supplement.••You need to set one DM-3200 to be the cascade master andthe other to be the cascade slave. Any set-up that affectsthe operation of the system as a whole will be performedon the cascade master.An audio clock source is selected from the clocks fed tothe cascade master. You cannot select the audio clocksource on the cascade slave.Timecode fed to the cascade slave cannot be used as thesynchronization source.••The cascade connection can be turned ON and OFF onlyon the cascade master.When the cascade connection is ON, the parameterset-ups on the cascade master (parameters to be inter-locked) are reflected on the cascade slave.••Master/slave setting