Tascam DM-3200 Release Notes

Also see for DM-3200: Quick reference Owner's manual Manual Software guide Application guide

DM-3200 Release NotesTASCAM DM-3200 Release Notes V1.50 Meter over-level settingsIn the METER/FADER>METER screen, you can now makefine adjustments to the point at which the over-level indica-tor will light in order to match other equipment present inyour system.Figure 12 METER/FADER>METER screenUse the POD 2 knob to select one of the following as thepoint at which the over-level indicator will light.-0.20, -0.17, -0.13, -0.10, -0.06, -0.03Cursor location when a multi-controlscreen is displayedThe cursor location will now move to the module selectedby the SEL key when you display a multi-control screensuch as the AUX1-2 screen.ªªMUTE Clear function has been addedBy holding down the SHIFT key or CTRL key and press-ing a MUTE key, you can now defeat muting for all chan-nel modules.SHIFT key + MUTE key: Defeat muting for the currentlyselected channel layerCTRL key + MUTE key: Defeat muting for all channel layersThis function does not work for master modules such asBUSS, AUX, or STEREO.NOTESolo can be cleared in a similar way.ªWhen you write the current channel during an automationwrite rehearsal, the automation status area in the upperpart of the LCD will now indicate [WR-RHS], indicatingthat rehearsal is occurringAutomation WR-RHS indication has been addedAbout remote controlUse P2 protocol to remotely control theX-48You can now use P2 protocol to control the transport of theX-48.In the supported devices area of the REMOTE>MACHINECTRL screen, choose MM/MX-24/X-48.ªFigure 13 REMOTE>MACHINE CTRL screenYou can specify 1-48 as the REC Function.