Tascam DM-3200 Release Notes

Also see for DM-3200: Quick reference Owner's manual Manual Software guide Application guide

DM-3200 Release NotesTASCAM DM-3200 Release Notes V1.50 The PROJECT Property shows date information, but inprevious versions this was the date of creation. This hasbeen fixed so that the most recently edited date and timeare shown. When you press the STORE button in the vari-ous LIBRARY screens, the resulting operation had been thesame as when pressing the STORE AS button. This has beenchanged so that the operation is the same as when youpress the top panel STORE key.The file name used when you store by pressing the STOREbutton in the AUTOMATION>FILES screen is now the same aswhen you store by pressing the KEEP key.Change in the date information for Project PropertyMaintenance ItemsThis sectiondescribes the Maintenance items for each revision of the DM-3200 software.Maintenance Items in V1.30ProjectCreate projectA problem has been fixed which had sometimes made itimpossible to create a new project after the current projectname was edited.Load projectA problem has been fixed in which the LED indicating theªªselected control room source was displayed incorrectlywhen a project was loaded.A problem has been fixed in which the cascade connectionstatus sometimes became invalid when loading a projectthat changed the cascade master/slave relationship.CF cardsA problem has been fixed that had caused the capacity tobe shown incorrectly for CF cards larger than 1G byte.A problem has been fixed that had caused the status of aCF card to be sometimes detected incorrectly when the CFwas formatted at start-up.A problem has been fixed that had caused the status of aCF card formatted on Windows XP or Mac OS 10.4.3 to bedetected incorrectlyV1.30 Remote controlCh 9-16 screen text display when usingSonar4A problem has been fixed in which the text display foreach module was not shown in the channel 9-16 screenwhen using Sonar 4 in the Mackie Control mode.Stereo fader operation using Mackieprotocol and another external controllerWhen the Mackie Control External Controller was used inconjunction with another External Controller that used theremote fader bank, moving the master fader would operatethe Mackie Control master fader function even when thefader bank was currently assigned to the other controller.This has been fixed.ªªMMC CHASE commandThe MMC machine control CHASE command is nowsupported.In setups in which P2 protocol is used to control a VTR orother device, and the recorder is the time-code slave, therecorder can be set to MMC control to allow recording onthe recorder.Fig 20: machine_P2mmc.pngªMaintenance Items in V1.50V1.50 Remote controlPreviously, the LCD would unexpectedly switch focuswhen both MIDI Faders and the DAW Control Surfacefeature was being used and the master fader touched.This has been fixed.

/ 26

Related manuals for Tascam DM-3200