Tascam DM-3200 Release Notes

Also see for DM-3200: Quick reference Owner's manual Manual Software guide Application guide

DM-3200 Release Notes TASCAM DM-3200 Release Notes V1.50When the separately sold IF-FW/DM MKII option card isinstalled, you can now transfer up to 32 channels of I/O (at44.1kHz/48kHz/88.2kHz/96kHz) between your computerand the DM-3200.For details on the IF-FW MKII, refer to the IF-FW MKIIoperating manual.TDIF Hi-Speed supportWhen operating at a high sampling rate (88.1k/96kHz),the high speed mode of TDIF-1 connectors 1-3 and theseparately sold IF-TD/DM option card are now supported.Even when operating at a high sampling rate, one TDIF-1connector can transfer eight channels of digital audio I/O,and when the IF-TD/DM is used in conjunction with theX-48, a maximum of forty channels of digital audio I/Ocan be transferred.TDIF-1 1-3Figure 6 DIGITAL>FORMAT screenªIn the DIGITAL>FORMAT screen TDIF I/O Tx/Rx MODEsection, you can now switch between high speed and dualline for TDIF-1 connectors 1-3. This selection will switchall three of the TDIF-1 connectors.When using high speed operation, the 8 I/O setting willbe available for TDIF input/output in the ROUTING screen;when using dual line, only the 4 I/O setting will be available.IF-TD/DMFigure 7 DIGITAL>SLOT screenAn indication of HI-SPEED is shown in the TDIF-1 Cardscreen of the DIGITAL>SLOT screen.IF-TD/DM supports only high speed; it does not supportdual line.New Features in V1.30IF-FW MKII supportDAW control screen display of channels 1-16In each DAW control screen, you can now view all sixteenchannels in a single screen.The following illustration is an example screen for Logiccontrol.Figure 5 Example screen for Logic controlThis version of the DM-3200 is now fully supported by Windows Vista 32 bit and Vista 64 bit.Windows Vista