DM-3200 Release NotesTASCAM DM-3200 Release Notes V1.50 When making REC function settings with multiple DTRSdevices connected, and the REC function of track 9 or lateris operated from the DTRS unit, that status is not reflectedin the mixer.DTRS REC FUNCTION setting when controlling via P2Auto detection of MMC control targetWhen loading a project that includes MMC Full (closed-loop) control, be sure to connect and power on the MMCdevice first. Also, power on the MMC device before start-ing the mixer, otherwise the MMC device may not becorrectly identified or controlled.Known Issues in V1.50Known IssuesThis section describes the Known Issues for the latest DM-3200 softwareUpdating the firmware on a cascaded mixerWhen updating the firmware on a cascaded mixer, firstdisconnect the cascade cable.USB Connection notesMac OS X:If TMC or your DAW software fails to find yourmixer after putting your computer into Sleep mode,please remove the USB cable and re-connect it beforere-launching TMC or your DAW software.Windows XP:If TMC or your DAW software fails to find your mixer afterputting your computer into Standby mode or Hibernationmode, please re-launch TMC or your DAW software.Windows Vista:If TMC or your DAW software fails to find your mixerafter putting your computer into Standby mode, Sleepmode or Hibernation mode, please re-launch TMC or yourDAW software again.To prevent this problem re-occuring, please set yourcomputer to not automatically go into Standby orHibernation modes.