TASCAM DP-24 152 - Quick GuideConnecting and setting the inputsources1. Connect an electric guitar to the MIC/LINE INPUTSH jack on the rear panel.2. Set the LINE-GUITAR switch to GUITAR on the rearpanel.The GUITAR indicator lights.Now the guitar becomes the input source for INPUT H.TIPWhen connecting an electric-acoustic guitar with a built-in preamp or an active-type electric guitar, or when usingan effects pedal, for example, between the guitar andthis unit, set the LINE-GUITAR switch to LINE on the rearpanel.Setting the guitar as the recordingsource for TRACK 1When you press the ASSIGN button to open the Assignscreen, the default screen setting for the recording sourceis A (INPUT A) for TRACK 1, B (INPUT B) for TRACK 2, C(INPUT C) for TRACK 3, and so on for D to H (INPUT D to H)for TRACK 4 to 8. (See "Assigning inputs" on page 44.)Since initially the input source of the INPUT H is set as therecording source of the TRACK 8, you must change therecording source to TRACK 1.Follow the procedure below to change the recordingsource of the TRACK 1.1. Press the ASSIGN button to open the Assign screen.2. Use the CURSOR (5/b/g/t) buttons or press theSELECT button for TRACK 1 and align the cursor(frame) on the Assign screen with TRACK 1.3. Use the JOG/DATA dial or the SOURCE button forINPUT H to set the recording source of TRACK 1 toH.Adjusting and monitoring the inputlevel1. Press the HOME button to return to the Homescreen.2. Press the REC button for TRACK 1.The REC button flashes and the unit enters recordingstandby.GuitarGUITAR indicator
