76 TASCAM DP-2411 - Various Other Functions7. After tuning the instrument, press the HOMEbutton to return to the Home screen.NOTEThe following buttons can be controlled in the Tunermode.INPUT TRIM (Analog)JOG/DATA dial (Calibration)Monitor levelSetup (PREFERENCE)You can use the PREFERENCE screen to change varioussettings to optimize the unit for your use environmentand other requirements, as well as to restore the factorysettings.The PREFERENCE menu allows you to customize the unitto your preference.Follow the procedure below to open the PREFERENCEscreen.1. When the recorder is stopped, press the MENUbutton to open the MENU screen.2. Use the JOG/DATA dial or the CURSOR (5/b/g/t) buttons to select PREFERENCE, and then pressthe F4 (t) button.The PREFERENCE screen appears.3. On the PREFERENCE screen, use the CURSOR(5/b) buttons to select a parameter, and then usethe JOG/DATA dial to change its setting.Contrast (LCD adjustment)•Brightness (LCD adjustment)•Backlight (LCD adjustment)•Foot SW Right (Foot switch R assignment)•Foot SW Center (Foot switch C assignment)•Foot SW Left (Foot switch L assignment)•Undo History (Switch over between level 1 and level•10)Jump Back (Jump time setting)•Auto Monitor (Auto Monitor setting)•Preview Time (Preview time setting)•Song Name Type (Switching between DATE and•WORD)Date/Time (System time/date setting)•Initialize (Factory setting reset)•Auto MonitorWhen stopped and the Recorder function is enabled, theinput monitoring becomes possible.The Auto Monitor starts playback, mutes the input sound,and provides the monitoring of the playback sound only.OFF (Default):Even when the playback starts, the input sound is notmuted.When the Recorder function is ON, the input soundand the playback sound are mixed.ON:When the playback starts, the input sound is muted.When the Recorder function is ON, only playbacksound is heard.
