Tascam Digital Portastudio DP-24 Owner's Manual

Also see for Digital Portastudio DP-24: Owner's manual addendum Notice Manual Troubleshooting supplement Quick start guide

Contents

Tascam Digital Portastudio DP-24 Owner's Manual Manual pdf 95 page image

TASCAM DP-24 9516 – MessagesWork Memory FullThe work memory is full.Even if the SD card has enough remaining space, this error may occur when you perform manyediting operations. You may be able to continue the work if execute the DELETE UNUSEDitem of the SONG menu to increase the available space in the work memory. (See "Undoing anoperation" on page 50.)Audio Rst FailIf any of these errors occur, turn the unit power off and restart it.If these error messages continue to appear, please contact a TEAC Service Center.Device ErrorFile ErrorNo CD DriveNot ContinuedRemote CmdRemote RxSys Rom ErrSystem Err 50System Error 1System Error 2System Error 3System Error 4System Error 5System Error 6System Error 7System Error 8System Error 9Writing FailedCD mode messagesThe following pop-up messages appear when the unit is in CD mode (when the CD menu screen or one of its submenus isopen).Refer to this chart when you want to understand the meaning of these messages and how you should respond to them.Message Description and remedyBlank CDInsert CD-RWA blank CD has been inserted. Insert a CD-RW that is not blank.An erased CD-RW or unwritten CD-RW has been set with the ERASE item of the CD menuscreen.There is no need to erase the inserted CD-RW.Blank CDInsert Opened CDA blank CD has been inserted. Insert a non-finalized CD-R/CD-RW.An erased CD-R/CD-RW or unwritten CD-R/CD-RW has been set with the FINALIZE item ofthe CD menu screen. Insert the CD-R/CD-RW that you want to finalize.Finalized CDInsert CD-RWA finalized CD-RW has been inserted. Insert a non-finalized CD-RW.A finalized CD-R/CD-RW has been inserted with the ERASE item of the CD menu screen. OnlyCD-RW discs can be erased.Finalized CDInsert Opened CDA finalized CD-R/CD-RW has been inserted. Insert a non-finalized CD-R/CD-RW.A finalized CD-R/CD-RW has been inserted with the FINALIZE item of the CD menu screen.This CD-R/CD-RW does not need to be finalized.Import File TooBigSize of file to be imported is too big.The size of the file to import equals or exceeds the free space on the SD card when executingan import with the CD-DA IMPORT item of the CD menu screen.Create more free space on the SD card by erasing the undo operation history, for example, toensure sufficient free space for reading the import file.Invalid CDInsert Blank CDAn invalid CD-R/CD-RW has been inserted. Insert a blank CD.When you try to write to a CD-R/CD-RW using the MASTER WRITE or the CD BACKUPitem of the CD menu screen, but inserted a CD-R/CD-RW that is not a blank CD. (When writingwith Track At Once, this message appears if a finalized CD-R/CD-RW is set.)Insert a blank CD.