Tascam Digital Portastudio DP-24 Owner's Manual

Also see for Digital Portastudio DP-24: Owner's manual addendum Notice Manual Troubleshooting supplement Quick start guide

Contents

Tascam Digital Portastudio DP-24 Owner's Manual Manual pdf 61 page image

TASCAM DP-24 618 - Track EditingIN/OUT/TOªTo set the IN/OUT/TO points again, exit the TRACK EDITscreen, and set them again from the beginning.TARGET TrackªThis is the target editing track. In the case of OPEN, CUT,SILENCE, and CLEAN OUT, it becomes the target track itself.The choices depend on what you have already chosen forthe SOURCE Track.When a single track is specified as the SOURCE Track,the TARGET Track options are 1 to 12 (single tracks).When a stereo track (e.g. 13/14) is specified as theSOURCE Track, the TARGET Track options are13/14 to 23/24 (stereo track).You can also use the• SELECT buttons of the tracks.When ALL (all tracks) is specified as the SOURCETrack, the TARGET Track option is ALL (all tracks)only.TIMESªSet the number of times that the copied section will bepasted.Set the number between 1 and 99.COPY/PASTEThis function copies the audio data from between the INand OUT points on the COPY source track, and pastes iton the COPY destination track starting from the TO point.This operation does not change the COPY source track.This operation overwrites recorded data on the COPYdestination track. Therefore, the length of the COPYdestination track is not changed.You can make multiple copies in a single operation.In other words, you can overwrite the COPY destinationtrack from the TO point with a designated number ofrepetitions of the COPY data.The following parameters are used in this operation.SOURCE Track• (1 to 12, 13/14 to 23/24, ALL)IN/OUT/TO•TARGET Track•TIMES•COPY/INSERTThis function copies the audio data from between the INand OUT points on the COPY source track, and inserts iton the COPY destination track starting from the TO point.This operation does not change the COPY source track.This operation inserts recorded data into the COPYdestination track. The recorded data on the COPYdestination track after the TO point is offset by the amountof time used by the inserted audio data. Therefore, theCOPY destination track becomes longer.You can make multiple copies in a single operation. Inother words, you can insert a designated number ofrepetitions of the COPY data into the COPY destinationtrack from the TO point.The following parameters are used in this operation.SOURCE Track• (1 to 12, 13/14 to 23/24, ALL)IN/OUT/TO•TARGET Track•TIMES•