Tascam Digital Portastudio DP-24 Owner's Manual

Also see for Digital Portastudio DP-24: Owner's manual addendum Notice Manual Troubleshooting supplement Quick start guide

Contents

Tascam Digital Portastudio DP-24 Owner's Manual Manual pdf 47 page image

TASCAM DP-24 476 - Basic RecordingUse the SELECT button of each track to select thedesired track.Press the SOURCE button of each INPUT to change theinput.Use the HIGH, MID, and LOW GAIN knobs to adjustthe gain.Use the HIGH, MID, and LOW FREQ knobs to adjustthe frequency.Use the MID Q knob to set the MID FREQ bandwidth.Setting range: 0.25 to 16 (Default: 0.5)Press the EQUALIZER ON/OFF button to turn theequalizer on or off.NOTE"Q"• refers to the center frequency of the equalizerdivided by the bandwidth. A high Q value reducesthe cut and/or boost applied to the frequencies.Depending on the equalizer setting, the graph at thetop of the screen changes.If you press the• F1 (EQ FLAT) button, all the settingson the open Mixer screen will be restored to theirdefault values.3. After making the settings, press the HOME buttonto return to the Home screen.DIGITAL TRIM setting (Track only)1. Use the CURSOR (5/b/g/t) buttons to move thecursor to the DIGITAL TRIM display area.2. Turn the JOG/DATA dial to set the value.Setting range: -42dB to +6dB (Default: 0dB)NOTENormally, set to 0dB, but if you want to boost theequalizer, we recommend that you lower the gain toprevent digital clipping.Built-in Send Effects and ExternalEffectsThis unit has two external effect send systems (EFF 1 andEFF 2) and a built-in effect send function (INSERT EFFECT).You can adjust send levels for each track. For details aboutthe built-in send effects, see "Send effects" on page 65.1. Use the CURSOR (5/b/g/t) buttons to move thecursor to the EFFECT item on the SEND EFF 1/EFF 2 display area.2. Turn the JOG/DATA dial to set the effect.Options: OFF (default), PRE, POSTPREThis sends the track pre-fader signal to the effectsend bus. The effect send signal level is not affectedby the track fader.POSTThis sends the track post-fader signal to the effectsend bus. The effect send signal level is affected bythe track fader.3. Use the SEND EFF 1/EFF 2 to adjust the send level.Setting range: 0 to 127 (Default: 0)4. Use the SEND MASTER 1/MASTER 2 to adjust thesend master level.Setting range: 0 to 127 (Default: 0)Setting built-in effects1. Use the CURSOR (5/b/g/t) buttons to move thecursor to the INSERT EFFECT display area.2. Turn the JOG/DATA dial to set the built-in effect.Options:OFF: INSERT EFFECT indicator unlit (default)ON: INSERT EFFECT indicator litEffect sendindicationINSERT EFFECTindicatorDIGITAL TRIMindication