Tascam Digital Portastudio DP-24 Owner's Manual

Also see for Digital Portastudio DP-24: Owner's manual addendum Notice Manual Troubleshooting supplement Quick start guide

Contents

Tascam Digital Portastudio DP-24 Owner's Manual Manual pdf 56 page image

56 TASCAM DP-247 - Recorder FunctionsNow, jog sounds can be heard. (Jog sound refers to arepeat playback sound of a short period.)4. Use the JOG/DATA dial to find a cue point whilechanging the jog sound playback position.5. When the cue point is determined, press the JOGPLAY button to return to the Home screen.NOTEThe transport button is available even in search mode.However, while the timeline is displayed, pressing thePLAY button switches between the normal playbackand jog sound playback, and pressing the STOP buttonperforms jog sound playback.Repeat playbackUse the repeat playback function to play the same partagain and again.The repeat playback interval is the section between the INand OUT points.Setting IN/OUT pointsIn addition to setting the repeat playback interval, theIN and OUT points are also used to set track editingintervals and as the punch in and punch out pointswhen automatically punching in and out. Moreover,these points are used as the start and end points of themixdown master file when creating a master file.You can set these points during recording, playback orwhen the unit is stopped.NOTEThe IN and OUT points cannot be set or edited in thefollowing cases.In Repeat Playback mode•In• Auto Punch modeIn• Mastering mode of the Recorder modeUsing IN/OUT pointsªRegardless of whether the unit is stopped, playing backor recording, when the recorder is at the desired position,press and hold the MARK SET button and press the IN orOUT button.The position where you pressed the IN/OUT button is setand the time is displayed on the Home screen.Locating IN/OUT pointsªWhen stopped or during playback, press the IN or OUTbutton.Using repeat playback1. Set the IN point and the OUT point you wantto make the start and end points of the repeatplayback interval, and then return to the Homescreen.2. Press the REPEAT button.The icon appears on the Home screen, and repeatplayback starts.After the playback starts from the IN point and reachesthe OUT point, it returns to the IN point and repeats.Playback continues to repeat between the IN and OUTpoints.3. To cancel the repeat playback, press the REPEATbutton, so that the icon disappears from theHome screen.Moving back a few seconds forreplay (jump back playback)Press the JUMPBACK (PREVIEW) button during playbackto move back a few seconds (adjustable) and restartplayback (Jump back function).If you want to hear a passage again during playback,press the JUMPBACK (PREVIEW) button to go back a fewseconds and replay that passage.1. When the recorder is stopped, press the MENUbutton to open the MENU screen.2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)buttons to select (green highlight) PREFERENCE,and then press the F4 (t) button.The PREFERENCE screen appears.Repeat icon