TASCAM DP-24 293 – Names and Functions of PartsRear panelS STANDBY/ON buttonWhen the power is OFF (standby), press and hold thisbutton to turn the power on. When power is ON, pressand hold this button to turn the power off (standby).(See "Start-up & Shutdown" on page 35.)D SD card slotInsert the SD card into this slot.F USB portUse the included USB cable to connect with acomputer USB port. (See "Connecting to a computer"on page 80.)CAUTIONAlways connect the unit directly to a computer. Do notuse a USB hub.G GROUND connectorDepending on the use environment, you mighthear noise when monitoring. If this occurs, use thisconnector to ground the unit. (Please prepare thenecessary wiring yourself.)H Kensington lock attachment holeJ DC IN 12V jackConnect the supplied TASCAM PS-1225L AC adapter.K Cord holderWrap the cord of the supplied TASCAM PS-1225L ACadapter around this holder to prevent the plug frombecoming disconnected accidentally.L MIDI OUT jackThis is a standard 5-pin DIN MIDI output jack.This jack is used for MIDI signal output.: MIDI IN jackThis is a standard 5-pin DIN MIDI input jack.This jack is used for MIDI signal input.Z MONITOR OUT jacks (standard balanced TRS jacks)These jacks output the signal selected in the monitorsection of the top panel. These are standard balancedphone jacks.X EFFECT SENDS jacks (standard unbalanced TSjacks)These jacks output the signal from effect sends 1 and 2.C STEREO OUT jacks (unbalanced RCA jacks)These jacks output the stereo bus signal.V LINE-GUITAR switchYou must set this switch according to the inputsource of the MIC/LINE INPUTS H. When connectingdirectly an electric guitar, electric bass or othersimilar instrument, set this switch to GUITAR.When connecting a digital instrument or an audioequipment, set it to LINE.B MIC/LINE INPUTS A-H jacks (balanced)These are balanced analog XLR/TRS combo jacks formicrophone and line inputs.XLR (1: GND, 2: HOT, 3: COLD)•TRS (Tip: HOT, Ring: COLD, Sleeve: GND)•
