88 TASCAM DP-2414 - Using CDs7. To change the song order, press the F2 (ORDER)button to open the WRITE SONG ORDER screen(song order change screen).8. Use the JOG/DATA dial or the CURSOR (5/b)buttons to select (blue highlight) the song whoseorder you want to change, and then press the F2(MOVE) button.4 appears before the song name.9. Use the JOG/DATA dial to shift the song position.Press the F2 (SELECT) button to confirm.To change the order of multiple songs, repeat thesteps 8 and 9 above.10. When the song order is as you want, press the F1(g) button to return to the WRITE SONG LISTscreen.11. To change the gap between the songs, press the F3(GAP) button.The WRITE SONG GAP screen appears.12. Use the CURSOR (5/b) buttons to select (bluehighlight) the songs whose gap you want tochange, and then use the JOG/DATA dial to set thegap.The song gap can be set between 0.0 to 9.9 seconds,in 0.1 units.NOTETo change the gap between multiple songs, repeat thestep 12 above.13. You can press the F2 (ALL) button to set all gaps atonce.Use the JOG/DATA dial to set the gap between thesongs.Press the F2 (SET) to confirm the setting and return tothe WRITE SONG GAP screen.14. Once the change is completed, press the F1 (g)button to return to the WRITE SONG LISTscreen.15. After finishing the song order and song gapsettings, press the F4 (t) button.16. As a confirmation message appears, press the F2(YES) button to confirm.The CD-R/CD-RW writing starts.NOTEIf you want to cancel the writing, press the F1 (NO) buttonto return to the WRITE SONG LIST screen.17. When writing is completed, a message appearsasking whether you want to write another CD-R/CD-RW with the same contents.If you want to burn another CD-R/CD-RW with thesame contents, press the F2 (YES) button. If youdo not want to burn another disc, press the F1 (NO)button.Using Track At OnceWhen using Track At Once, after one track is written, a 2second gap is added after it.
