Tascam Digital Portastudio DP-24 Owner's Manual

Also see for Digital Portastudio DP-24: Owner's manual addendum Notice Manual Troubleshooting supplement Quick start guide

Contents

Tascam Digital Portastudio DP-24 Owner's Manual Manual pdf 86 page image

86 TASCAM DP-2414 - Using CDsEjecting a CD1. When Recorder mode is Multi Track mode,press the CD button to open the CD menu screen.2. Press the F3 (-) button or the disc tray ejectbutton on the front panel to open the tray slightly,and then pull the tray out until it opens completely.Hold the disc by its edges and lift it out.CAUTIONDo not lift the disc forcibly. Doing so could damage theunit or the disc.Forcing disc ejectionIf the disc is not ejected even when you press the F3 (-)button of the CD menu screen or press the disc tray ejectbutton on the front panel due to a failure of the CD drive,etc., you can eject the disc by using the emergency ejectbutton (emergency eject hole).Before using the emergency eject function, turn thepower off (standby), disconnect the AC adapter from theunit, and follow the procedure below.1. Prepare an extended clip or another similar object.2. Insert the extended clip into the emergency ejecthole and press the inner button a couple of times.3. When the disc tray opens slightly, use your hand topull it out.CAUTIONUse this function only in an emergency. Normally,•remove the disk by the usual procedure. (See "Ejectinga CD" above.)Never perform the disc emergency ejection when•power is ON.Playing back an Audio CD1. Press the CD button to open the CD menu screen.2. Load an Audio CD.3. Use the JOG/DATA dial to select (blue highlight)PLAY/IMPORT and then press the F4 (t) button.The CD PLAYER screen appears and the CD driveworks as a CD player.1 This shows the number of the track currentlyplaying back.2 This shows the numbers and times of each track.You can use the JOG/DATA dial to move theselected track up and down. When the CD player isstopped, press the PLAY (7) button to play backthe selected track.3 This shows the elapsed time from the beginningof the track currently playing back.4 This is the level meter of the audio recorded onthe CD. The playback signal sent from the CD tothe MONITOR OUT jack or PHONES jack of thisunit cannot be adjusted with the STEREO fader.4. When the CD PLAYER screen is displayed, you canuse the JOG/DATA dial and other buttons to controlthe CD player.Button/dial DescriptionJOG/DATA Selects the track for playback.STOP (8) Stops the CD player.PLAY (7)Plays back the selected trackwhen pressed when CDplayer is stopped.REW (m)(TO ZERO)Skips to previous track whennear the beginning of a track.Returns to the beginning ofthe current track when in themiddle of a track.F FWD (,)(TO LAST REC) Skips to the next track.STOP (8)+ REW (m)(TO ZERO)Skips to the first track on theCD and stops.F2 (4) Selects the track to beimported.F3 (-) Stops the playback and opensthe disc tray.F4 (t) Executes the import.