TASCAM DP-24 172 - Quick Guide3. Press the HOME button to return to the Homescreen.4. Press the REC button for TRACK 2.Its REC indicator blinks and the unit enters recordstandby.When you play the guitar, the input level is shown bythe level meter for 2 (TRACK 2).5. Return to the beginning of the song (ZERO point)and start playback of the recorded rhythm guitar toplay the lead guitar part along with the recording.Raise the fader for TRACK 2 to hear both the playbackof TRACK 1 and input guitar signal through yourheadphones.6. As necessary, use the faders for TRACK 1 and 2, PANknobs, STEREO fader and MONITOR LEVEL knob toadjust the monitoring level and balance.7. Return to the beginning of the song, press theRECORD (0) button to start recording, and play thelead guitar part.The RECORD (0) button lights red, and the RECindicator for TRACK 2 stops flashing and becomes lit.8. After you finish your performance, press the STOP(8) button to stop recording.The recorded file is saved in the folder of the currentlyloaded song.9. Press the REC button for TRACK 2 so the REC buttonbecomes unlit.Recording a vocal to TRACK 31. Press the ASSIGN button to open the Assign screen.2. Use the CURSOR (5/b/g/t) buttons or press theSELECT button for TRACK 3 and align the cursor(frame) on the Assign screen with TRACK 3.Use the JOG/DATA dial or press the SOURCE buttonfor INPUT B to set the recording source of the TRACK 3to B.3. Press the HOME button to return to the Homescreen.4. Press the REC button for TRACK 3.The REC indicator blinks and the unit enters recordstandby.5. Use the TRIM knob for INPUT B to adjust the inputlevel suitably for the mic. Set the TRIM knob so thatthe OL indicator for INPUT B does not light evenwhen the loudest sound to be recorded is input.OL indicator
