TASCAM HS-20 10110 – Internal settingsuninterrupted and the download will be executed, butdeletion will not be executed.• During downloading, the SD/CF card indicator blinks.• The timer event information file will be read automaticallywhen a folder is loaded.• If the timer event information file (HS_EventList.tlist) isoverwritten an FTP or Browse function, the timer eventinformation file will automatically be read again.CAUTIONIf you do not save, all timer event changes will be lost whena folder is loaded, the card is removed or the unit is turnedoff.TIMER EVENT SETUP screenUse this screen to edit the settings of a specific event.Common settingsFor recording and stop events, only the common settingsare shown and can be set.78234 5 611 Event Type buttonsUse these buttons to set the event type.o Playback: PLAY (y)o Repeat playback: PLAY (y·)o Record: REC (p)o Stop: STOP (8)o Download: Down-load (È)(Download from the FTP server)o Download after deleting: Delete&DL (È)(After all audio files in the current folder are deleted, theunit will download from the FTP server.)2 Schedule Type buttonsUse these buttons to set the schedule type of the event.3 Time fieldsUse these to set the event execution time (hour, minute andsecond).Touch these to highlight them yellow. When highlighted,you can use the DATA dial to adjust them.4 CANCEL buttonTouch this to discard all changes and return to the TIMEREVENT LIST screen.5 Event Repeat (Interval Time) fieldsUse these to set the the interval between repeat eventexecution (hours and minutes).Touch these to highlight them yellow. When highlighted,you can use the DATA dial to adjust them.6 Event Repeat (Event Count) fieldUse this to set the the number of times the event is repeated(1–100).(If set to “1” the event will not repeat.)Touch these to highlight them yellow. When highlighted,you can use the DATA dial to adjust them.7 Event Repeat (Last Event Time) display.This shows the last time that the repeated event will beexecuted.8 OK buttonTouch this to confirm all changes and return to the TIMEREVENT LIST screen.NOTERepeat event setting exampleTo make an event repeat on the hour from 10:00 to 19:00,make the following settings.Time 10:00Event Repeat: Interval Time 01:00Event Repeat: Event Count 10Schedule type screeno DayOn the TIMER EVENT SETUP screen, select the Day ofWeek button to enable setting specific days of the week(for weekly repetition).The day of week buttons allow each day to be turnedON/OFF separately.o DateOn the TIMER EVENT SETUP screen, select the Datebutton to enable setting a specific date for eventexecution.Touch the event date areas to highlight them yellow.When highlighted, you can use the DATA dial to adjustthem.NOTEThe month area can also be set to all months by selecting"***" which appears between "Dec" and "Jan" in order.