18 TASCAM HS-202 – Names and functions of partso Folder Name mode buttonUse the folder name as the first half of the take name.o Date/Time mode buttonUse the date/time for the first half of the take name. (Theformat is “yyyymmdd-hhmmss”.)Example: If it was created at 3:10:20 PM on July 1,2014, the first half of the take name will be“20140701-151020”.o Second half of take namesThe second half of the take name is comprised of onealphabetical letter and a three-digit number. Touch theEDIT button to open the screen where you can changethe letter.You can change the three-digit number with the +and – buttons. You can also touch the numerical part tohighlight it in yellow and use the DATA dial to changethe number.In the following cases, “---” appears and the value cannotbe changed.o The current folder is not loaded.o The selected card is unavailableo When the numerical part of the file name of thecurrent take is 999CAUTION• The Next Take Name setting is saved to the SC/CF card. Ifyou change cards, the setting on that card will be used.(Even when using a card created on another HS series unit,the setting will change when you change the folder.)• The numerical part of the second half of the take name canbe changed even during playback and recording.(The first half of the take name and the letter in the secondhalf can only be changed when stopped.)NOTEIf the first half of the take name or the letter in the secondhalf is different, a take that has the same three-digit numberin the second half can be created.s INFO buttonTouch this button to open an information display that showsthe file name of the region at the timeline cursor and thecurrent unit settings beneath the track display area.The upper section shows the file name of the region at thetimeline cursor.The lower section shows the current sampling frequency,recording bit length and frame type settings.d Mark List buttonTouch this button to open the mark list. (See “Mark listscreen” on page 105.)f Manual Locate buttonTouch this button to open the MANUAL LOCATE screen. (See“Manual locate function” on page 108.)In take and playlist modeskmh jl;zxcvb ngIn take modeNOTEWhen in playlist mode, the INPUT MONITOR, EDIT and NEXTTAKE NAME buttons are not shown.g Timer event function status buttonThis shows timer event function status. (Take mode only): Timer event function on: Timer event function off: Timer event has been edited, but not saved
