TASCAM HS-20 10711 – Mark and locate functionsEditing mark positionsYou can change the position (time) of marks added using theMARK list (marks named “MARKXX”).NOTEAutomatically placed marks cannot be edited.1. Select the mark that you want to edit on the MARK LISTscreen.2. Touch the EDIT TIME button to open the MARK EDIT screen.Touch the FRAME EDIT button to set whether or not theframe value can be edited.FRAME EDIT onFRAME EDIT off3. Touch a number button to edit a mark. Use the DATA dial tochange the time for the selected number.Touch the ENTER button to confirm the setting and return tothe MARK LIST screen.o If you begin input without selecting a digit, input will startfrom the smallest one.o To input a specific digit, touch it to make its backgroundyellow, then use the number buttons or the DATA dial toenter two digits at a time.o Touch the CURRENT q button to copy the currentplayback position to the input value.o Touch the CLEAR button to clear all input values.TIPThis can also be input using a connected keyboard.Press the keyboard’s Enter key to confirm a setting and itsESC key to clear all the values.Editing mark names1. Select the mark that you want to edit on the MARK LISTscreen.2. Touch the EDIT NAME button to open the MARK NAMEscreen.Follow the same procedures as “Editing the name of a folderin the root directory” on page 33.NOTEYou can also open the MARK NAME screen by touching themark name area on the Home Screen.However, since the names of automatic marks cannot beedited, the MARK NAME screen will not open for them.