42 TASCAM HS-207 – Timeline modeWhen loading AES31 editing information, a progress statuspop-up appears.When loading completes, the pop-up window disappearsand the Home screen is opened.The loaded contents replace the contents of the timeline.Saving AES31 editing informationYou can save the current timeline as an AES31 file. The saved fileis created in the current folder.CAUTIONWhen you edit the timeline, save the AES31 editing infor-mation as necessary. If you do not save it, the changes willbe deleted if other AES31 editing information is loaded, thecard is removed or the unit is turned off.If you have not saved the information after editing, a “*”mark will be shown on the AES31 file name button.If you load other AES31 editing information when a "*" isshown, create new AES31 editing information, or changethe operation mode, a pop-up message asking if you wantto save the current AES31 editing information will appear.1. Press the HOME key to open the Home Screen.2. Touch the AES31 file name button on the Home Screen toopen the pull-down menu.3. When you touch the SAVE button on the pull-down menu,the information will be saved on the selected card.While saving, the progress status will be shown in thepop-up window.When saving is complete, the pop-up window will disappear.Attaching a name to and saving AES31editing informationYou can attach a name and save the current timeline as anAES31 file.The file saved will be created in the current folder.1. Press the HOME key on the front panel to open the Homescreen.2. Touch the AES31 file name button on the Home Screen toopen the pull-down menu.3. Touch the SAVE AS button on the pull-up menu to open theAES31 NAME screen where you can input the AES31 editingfile name.Input the file name. Follow the procedures “Editing the nameof a folder in the root directory” on page 33.4. Touch the Enter button on the AES31 NAME screen or pressthe DATA dial to save the input name.While the file is being created, a progress status pop-upappears.When file creation completes, the pop-up disappears.NOTEIf a file with the same name already exists, a pop-up windowopens to confirm whether you want to overwrite that file ornot. Touch the OK button to overwrite that file, or touch theCANCEL button to return to the AES31 NAME screen.
