TASCAM HS-20 9310 – Internal settingsDAYLIGHT SAVING TIME SETUP screenUse this screen to set the internal clock to use daylightsaving time during the set period.Daylight Saving ModeSet whether or not the HS-20 follows Daylight Saving Timechanges.o Disable (default): The HS-20 does not follow DST changes.o Enable: The HS-20 follows DST changes.Explanation Values STARTdefaultENDdefaultMonthSets the start andend months forDaylight SavingTime.Jan, Feb, Mar, Apr,May, Jun, Jul, Aug,Sep, Oct, Nov, DecMar NovWeekSets the startand end week forDaylight SavingTime1st, 2nd, 3rd, 4th,5th, Last 2nd 1stDay ofWeekSets the startand end day forDaylight SavingTimeSun, Mon, Tue,Wed, Thu, Fri, Sat Sun SunTimeSets the startand end hour forDaylight SavingTime00:00-24:00(01:00/step) 02:00 02:00To make the above settings, touch a knob to select it,making the background of the parameter yellow, and turnthe DATA dial to set it.NOTEThis screen shows the local time setting, not CoordinatedUniversal Time (UTC).Offset TimeThis is the amount of time that the clock is advanced duringdaylight saving time.Setting buttons: 30min, 60minDefault: 60minSNTP SETUP screenUse the screen to set the SNTP function that allows the unitto automatically synchronize the date and time with anInternet time server.STATUSThis shows the current status of the system in regards toSNTP.o Current Time: This shows the current date and time usedby the unit.o Last Sync Time: This shows the time the unit last synchro-nized with an NTP server.o SNTP Connection: This shows the status of connectionwith an NTP server.Message MeaningSuccessful update Time updated successfullySuccessful update withskew Delay occurred but time was updatedStarting Up The connection is starting upAccessing Server Connecting to serverDisabled SNTP function is disabledWaiting for Network Waiting to establish networkconnectionServer Name not found The server name could not be foundfrom a DNS serverServer Name found The server name was found from aDNS serverServer connection failed There was no response from theserverServer refusing connectionsThe server responded, but it isrefusing additional connections, sochoosing a different SNTP serverwould be good.SNTP MODEo Disable (default): The SNTP function is not used.o Enable: The SNTP function is used.NOTETo use the SNTP function, you must make the following NTPServer setting and DNS server setting on the NETWORKpage of the REMOTE SETUP screen.NTP ServerShows the NTP server name (32 characters or less)o Default: ntp.nict.jpTouch this area to open the NTP SERVER name input screenshown below.