46 TASCAM HS-207 – Timeline modeSetting the editing end point6 Use the m and , keys, for example, to locate thetimeline cursor at the position (time) where you want to endediting.7. Touch the SET/SELECT button to open the pull-up menu.8. Touch the SET OUT button on the pull-up menu to set theediting end point (OUT point).The OUT mark ( ) appears at the current position in themark display area.The range between the IN mark ( ) and OUT mark ( ) willbe edited, and is shown in light blue.Clearing the editing start/end points1. Touch the SET/SELECT button to open the pull-up menu.2. Touch the CLEAR button on the pull-up menu. When aconfirmation pop-up window is displayed, touch the OKbutton or press the DATA dial.The current IN and OUT points are deleted, and the IN mark () and OUT mark ( ) disappear from the mark area.Selecting a complete region for editing1. Press the HOME key on the front of the unit to open theHome screen.2. Touch the EDIT MODE button to enter edit mode.3. Move the timeline cursor to the region to be edited.4. Touch the SET/SELECT button to open the pull-up menu.5. Touch the SELECT Region button on the pull-up menu toselect the entire region at the timeline cursor. The beginningof the region is set to the edit start (IN) point and the end ofthe region is set to the edit end (OUT) point.The IN ( ) mark and OUT mark ( ) are shown at thebeginning and end of the region in the mark area. The rangebetween the marks will be edited and is shown in light blue.
