20 TASCAM HS-202 – Names and functions of partsCREATE PLAYLIST buttonThis opens the PLAYLIST NAME screen where you cancreate a new playlist.(See “Creating a new playlist” on page 65.); Level metersThese are the same as on the Home Screen in timelinemode.z Time display areaThe appearance depends on the time display mode.Mode Left end Right end00:00:00:00 Total take or entrylengthTotal take or entrylength 00:00:00:0000:00:00:00 Total folder or playlistlengthTotal folder or playlistlength 00:00:00:00Starting time of folderor playlistEnding time of folderor playlistWhen recording and in recording standby, however, the timebar and division lines are not shown.x Flash Page number and knobThis shows the Flash Page number. Touch this area to enableselection (yellow background), and turn the DATA dial tochange the page number (turn right to increase and turn leftto decrease).c Current time cursorThis cursor shows the playback position. This scrolls horizon-tally in correspondence with the time counter.It is not shown when recording (take mode only).v Mark nameThis is the name of the mark at the current time or thenearest preceding mark.Touch this part while a mark name other than the auto markis shown to open the mark name editing screen.b INPUT MONITOR buttonThese are the same as on the Home Screen in timelinemode.n EDIT buttonTouch this button to open a pull-up menu for take editing.m NEXT TAKE NAME buttonThese are the same as on the Home Screen in timelinemode.Flash start screen1. Press the HOME key when the Home Screen is already opento open the flash start screen.2. Use the DATA dial to select the page that contains thetakes or entries that you want to play after touching andhighlighting (yellow background) the operation/displayknob on the flash page.NOTEThe flash start screen has five pages (PAGE 1–5) that caneach show 20 takes.3. Touch a take or entry button that has a flash start indicatorlit orange on the display to use flash start playback. Flashstarting is also possible using a connected PS/2 keyboardand devices connected to this unit’s remote connectors(REMOTE, RS-232C and PARALLEL).4. Touch the INFO button to open the information screen.The contents of this screen are the same as the informationscreen that opens by pressing the INFO button when theHome Screen is open.
