74 TASCAM HS-209 – Playlist modeEditing fade-in/fade-out length and level1. Press the HOME key on the front panel to open the Homescreen.2. Touch the ADJUST ENTRY button on the pull-down menuthat is opened by touching a file or title name button.The ADJUST ### screen opens. (“###” is the entry number.)3. Touch the Start TC Fade/Level tab to open the screen shownbelow.4. Select the Fade In, Fade Out or Level knob and use the DATAdial to set the value.Rangeso Fade In/Out Length: 0 – 30 seconds(0.1 second per step or 1.0 second per step when the dialis pressed and rotated)o Level: −∞ to +10dBNOTE• After the length of a fade is changed, the value will beautomatically adjusted to a value that will fit within theplayback Start/End time interval.• The playback level is shown by a solid red line.• The reference level (0 dB) is shown by a dotted orange line.Rehearsal playbackYou can use the transport controls for rehearsal playback whileon the ADJUST ENTRY screen.o The operation is the same as during normal transportoperation except that the . and / keys are used tojump to the entry's file beginning, Start Point, End Pointand file end.o If you change the Start Point or Fade In Length, theplayback position will move to the Start Point. If youchange it during playback, playback will continue afterjumping to the new playback position.o If you change the End Point or Fade Out Length, theplayback position will move as follows. If you change itduring playback, playback will continue after jumping tothe new playback position.When PREVIEWoff When PREVIEW onWhen changingEnd PointTwo secondsbefore End PointTwo seconds beforeFade Out startsWhen changingFade Out LengthTwo secondsbefore Fade OutstartsTwo seconds beforeFade Out startso Touch the PREVIEW button to change the contents of therehearsal playback.Rehearsal playback when PREVIEW is offo The original audio is played back without fade in/out orlevel adjustments applied.o You can move out of the Start/End Point range.o When the End Point is reached during playback, playbackjumps back to the Start Point and stops.Press the PLAY key to start playback from the Start Point.Use the . key, / key, SHIFT + / key and theJOG/SHUTTLE dial to move playback to after the EndPoint.Rehearsal playback when PREVIEW is ono Only the interval between the Start Point and the EndPoint is played back.Locating to a point outside of that range is not possible.o The audio is played back with fade in/out and level adjust-ments applied.