wc_tx003611gb_FM10.fm115Working with Deep Sea Controller: DSE 731010.3 Adjusting Screen ContrastOverview The contrast of the LCD display can be adjusted to suit the operator’s preference.Procedure Perform the procedure below to adjust the screen contrast.1. Access the “Editor—Display” menu on the LCD panel (f) by pressing andholding the check mark button (5) on the keypad.2. Wait a few seconds for the “Contrast” screen to appear, or use up/down arrowkeys to navigate to the “Contrast” screen. Then, press the check mark button.The contrast value will start flashing.3. Press the up/down arrow buttons to change the contrast percentage as desired.When the screen contrast reaches a comfortable viewing level, press the checkmark button to accept the choice.4. Exit by pressing and holding the check mark button until the genset controllerreturns to the “Status” screen.Result The screen contrast has now been changed.DSE DEEP SEA ELECTRONICSwc_gr0098025fDSE 7310STOPDEEP SEA ELECTRONICDEEP SEA ELECTRONICSSDSDSEE DSE 7310DSE 7310wc_gr00985023STOP
