wc_tx003229gb_FM10.fm77Mobile Generator Working with Basler Controller8.7 Changing the Time/Date SettingsRequirements Machine stopped Start switch in REMOTE STARTNote: Internal programming of the genset controller, or closed connections to aremote start switch, may cause the machine to start unexpectedly. Be prepared forthe engine to start even with the engine start switch in the REMOTE STARTposition.Procedure Perform the procedure below to change the time and date.1. Press the right arrow button (1) to access the MAIN MENU.2. Using the up/down arrow buttons (2, 3) highlight SETTINGS. Then, press theright arrow button.3. Highlight GENERAL SETTINGS. Then, press the right arrow button (1).4. Highlight CONFIGURE DATE/TIME. Then, press the right arrow button.5. Highlight the setting you want change. Then, press the check mark button (5).6. If you are not logged in, enter the password “OP”. Press the check mark button.7. Using the up/down arrow buttons, change the value as desired. Press the checkmark button when finished.8. Exit by pressing the left arrow button (4) twice or until the LCD displays theSETTINGS menu. Then, scroll to LOGOUT and press the check mark button.Press the left arrow button so that the READY screen appears.Result The date/time settings have now been changed.wc_gr010133
