wc_tx003570gb_FM10.fm41Mobile Generator Lifting and Transporting4.6 Testing the Breakaway System (Hydraulic Surge Brakes)Requirements ■ Hydraulic reservoir filled■ Machine parked on a flat surfaceWhen Test the breakaway system:■ Before towing■ After filling the hydraulic reservoirProcedure Perform the following procedure to test the breakaway system.1. Position the machine/trailer on a flat surface.2. Connect the breakaway cable (a) to the tow vehicle. Do not connect themachine/trailer to the tow vehicle via the hitch.3. Slowly move the tow vehicle so that it pulls on the breakaway cord until theemergency lever reaches its second notch (b) and locks into the ON position.4. Connect the machine/trailer to the tow vehicle via the hitch.5. Attempt to tow the machine/trailer at a very slow speed (less than 5 mph). Whenactivated, a properly working breakaway system will cause substantial drag onthe trailer wheels and may even cause the trailer wheels to lock.6. If the brakes did not function, repair any faults before towing.This procedure continues on the next page.wc_gr008509awc_gr008508bWARNINGPersonal injury hazard. A faulty breakaway system may lead to an accident andpersonal injury if the machine/trailer breaks away.► Do not tow the machine/trailer if the breakaway system is faulty.
