wc_tx003618gb_FM10.fm55Mobile Generator Operation (Basler Controller)7.2 Engine Start SwitchDescription The engine start switch (a) is a three-position switch: “REMOTE START”, “OFF”,and “START/RUN”.FunctionAUSAUSAPAGADOAPAGADOARRETARRETOFFOFFREMOTE STARTREMOTE STARTFERNSTARTFERNSTARTARRANQUE REMOTOARRANQUE REMOTODEMARRAGE ADEMARRAGE ADISTANCEDISTANCESTART / LAUFENSTART / LAUFENARRANQUE / MARCHAARRANQUE / MARCHADEMARRER / MARCHEDEMARRER / MARCHESTART / RUNSTART / RUNawc_gr011436Position Function LCD ScreenREMOTE START This position is used when the generator isbeing operated as a stand-by power supply, andit is connected to a remote switch. Thegenerator is in stand-by mode and will not startuntil the remote switch is activated (closed).READY screenSTART/RUN This is the normal start and run position. Whenset to this position, power is supplied to thegenset controller which immediately launchesthe start-up sequence.As a precaution, be prepared for engine startupanytime the engine start switch is in theREMOTE START position.MonitoringscreenOFF Power to the genset controller is disconnected. Blank screen (off)
