wc_tx003572gb_FM10.fm48Mobile GeneratorMachine Setup5.3 Grounding the GeneratorExternalgroundingA ground connection is located at the customer connection terminal lugs.This ground connection is used for electrically grounding the generator whennecessary to comply with the National Electrical Code and other federal, state, andlocal regulations. For grounding requirements in your area, consult with a qualifiedelectrician, electrical inspector, or local agency having jurisdiction over electricalcompliance.■ If the generator is used at a construction site, there may be additionalregulations which must be observed.■ In some areas, generators are required to be registered with local utilitycompanies.Internalgrounding■ The exposed, conductive, noncurrent-carrying components that could becomeenergized (e.g., fuel tank, engine, generator housing, control panel, enclosure,and trailer) are bonded (connected) to the machine’s frame.■ The grounding wires of the machine’s power outputs (receptacles, lugs, andcamlocks) are bonded (connected) to the machine’s frame.■ The neutral of the generator stator winding is bonded (connected) to themachine’s frame.wc_gr011524
