CUSTOMIZINGINDEXCONTENTSINDEXCONTENTS 3131Customizing tool buttonsSelect the P EN tab to change the functions assigned to the side switch and tip of your Intuos3 Pen.Each tool button can be set to simulate a variety of mouse functions; the pull-down menus enable you tochoose the function that will be performed.Select the button functions toperform when pressing theupper or lower side switch.When you bring the pen tipwithin 6 mm (0.25 inch) of thetablet surface without touchingthe tablet and press the upper orlower side switch, the selectedfunction occurs.Hint: To make double-clickingeasier, set the side switch todouble-click automatically byselecting DOUBLE -CLICK .Double-click here to change thefunction assigned to the pen tip.• At least one tool buttonshould be set to the CLICKfunction.• The tip must be set to CLICKin order to draw in mostgraphics applications.Returns the tab settings to theirfactory default conditions.Note: For the precise placement of right- and middle-clicks, you canenable the SIDE SWITCH EXPERT MODE. Select the OPTIONS... buttonat the bottom of the control panel to display the OPTIONS dialog box.(SIDE SWITCH EXPERT MODE is the default setting on Tablet PCs.)
