NoteDo not load more than 50 envelopes into the tray, up to 45 mm (1.8 in.) in height.5. Adjust the width guides until they touch the edges of the envelopes.6. Slide the tray all the way into the printer.7. If the Tray Mode is set to Fully Adjustable, the printer prompts you to set the papertype, size and color.a) If the paper size, type and color are correct, touch OK.b) If the paper size, type or color are incorrect, change the settings.• To select a size, touch the current size setting, then from the list, selectCustom. Touch the Length field and select a number value. Touch the Widthfield and select a number value. Select OK.• To select a paper type, touch the current paper type, then from the list, selectEnvelope.• To select a different color, touch the current paper color, then from the list,select the color.c) To save the settings, touch OK.8. From the Print dialog at your workstation, select the paper setting values and clickOK. To feed and print the envelopes, click Print.LabelsYou can print labels from the Bypass Tray or Tray 1.Guidelines for Printing Labels• Use labels designed for laser printing.• Do not use vinyl labels.• Do not feed a sheet of labels through the printer more than once.• Do not use dry gum labels.• Print only on one side of the sheet of labels. Use full-sheet labels only.• Store unused labels flat in their original packaging. Leave the label sheets inside theoriginal packaging until ready to use. Return any unused label sheets to the originalpackaging and reseal it.Xerox® VersaLink® C505 Multifunction Printer6-22User GuidePaper and Media
