• Verify that the printer is plugged into an outlet that is providing the correct voltageand power. Review the electrical specification of the printer with an electrician ifnecessary.• Do not place the printer in an area where people can step on the power cord.• Do not place objects on the power cord.• Do not plug or unplug the power cord while the power switch is in the On position.• If the power cord becomes frayed or worn, replace it.• To avoid electrical shock and damage to the cord, grasp the plug when unpluggingthe power cord.The power cord is attached to the printer as a plug-in device on the back of the printer.If it is necessary to disconnect all electrical power from the printer, disconnect the powercord from the electrical outlet.Emergency Turn OffIf any of the following conditions occur, power off the printer immediately and disconnectthe power cord from the electrical outlet. Contact an authorized Xerox servicerepresentative to correct the problem if:• The equipment emits unusual odors or makes unusual noises.• The power cable is damaged or frayed.• A wall panel circuit breaker, fuse, or other safety device has been tripped.• Liquid is spilled into the printer.• The printer is exposed to water.• Any part of the printer is damaged.Telephone Line CordWarningTo reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or largertelecommunication line cord.Operational SafetyYour printer and supplies were designed and tested to meet strict safety requirements.These include safety agency examination, approval, and compliance with establishedenvironmental standards.Your attention to the following safety guidelines helps to ensure the continued, safeoperation of your printer.Operational Guidelines• Do not remove any trays when the printer is printing.• Do not open the doors when the printer is printing.• Do not move the printer when it is printing.1-3Xerox® VersaLink® C505 Multifunction PrinterUser GuideSafety
