Electrical SafetyGeneral GuidelinesWarning• Do not push objects into slots or openings on the printer. Touching a voltage pointor shorting out a part could result in fire or electric shock.• Do not remove the covers or guards that are fastened with screws unless you areinstalling optional equipment and are instructed to do so. Power off the printer whenperforming these installations. Disconnect the power cord when removing covers andguards for installing optional equipment. Except for user-installable options, thereare no parts that you can maintain or service behind these covers.The following are hazards to your safety:• The power cord is damaged or frayed.• Liquid is spilled into the printer.• The printer is exposed to water.• The printer emits smoke, or the surface is unusually hot.• The printer emits unusual noise or odors.• The printer causes a circuit breaker, fuse, or other safety device to activate.If any of these conditions occur, do the following:1. Power off the printer immediately.2. Disconnect the power cord from the electrical outlet.3. Call an authorized service representative.Power CordUse the power cord supplied with your printer.• Plug the power cord directly into a properly grounded electrical outlet. Ensure thateach end of the cord is connected securely. If you do not know if an outlet is grounded,ask an electrician to check the outlet.WarningTo avoid risk of fire or electrical shock, do not use extension cords, power strips, orpower plugs for more than 90 days. When a permanent outlet receptacle cannot beinstalled, use only one factory-assembled extension cord of the appropriate gaugefor each printer or multifunction printer. Always adhere to national and local building,fire, and electrical codes regarding length of cord, conductor size, grounding, andprotection.• Do not use a ground adapter plug to connect the printer to an electrical outlet thatdoes not have a ground connection terminal.Xerox® VersaLink® C505 Multifunction Printer1-2User GuideSafety
