7. To save your settings, touch OK.8. As needed, to enter additional values, repeat the previous steps.9. Print another sample page, then repeat the process until you complete theregistration corrections.10. To return to the Home screen, press the Home button.Transfer Voltage AdjustmentUse Transfer Voltage Adjustment to specify the bias transfer roller voltage for printingon the selected paper type. If the printed image is too light, increase the voltage for thepaper you are using. If the printed image is mottled or blotchy-looking, decrease thevoltage for the paper you are using.To adjust the transfer voltage:1. At the printer control panel, press the Home button.2. Touch Device > Support > Transfer Voltage Adjustment.3. To select the paper type for the adjustment, touch Paper Type, then touch the papertype.4. To adjust the transfer voltage, for Voltage Level, touch the Plus icon (+) or the Minusicon (-).5. Touch Adjust.6. To exit the menu, touch X.7. To return to the Home screen, press the Home button.Adjusting the FuserUse Adjust Fuser for optimum print quality across a wide range of paper types. If thetoner on a print is smearing or can be rubbed off the paper, increase the temperaturefor the paper you are using. If the toner is blistered or mottled, decrease the temperaturefor the paper you are using.To adjust the fuser:1. At the printer control panel, press the Home button.2. Touch Device > Support > Fuser Temperature Adjustment.3. To select the paper type, touch Paper Type, then touch the name of the paper typein the list.7-15Xerox® VersaLink® C505 Multifunction PrinterUser GuideMaintenance
