9. If your printer does not appear in the list of discovered printers:a) Click the Network Printer Icon.b) Type the IP address of your printer, then click Continue.c) Select your printer in the list of discovered printers, then click Continue.10. If your printer was not detected, verify that the printer is powered on and that theEthernet or USB cable is connected properly.11. To accept the print queue message, click OK.12. Select or clear the Set Printer as Default and Print a Test Page check boxes.13. Click Continue, then click Close.Adding the PrinterFor networking, set up your printer using Bonjour® (mDNS), or connect using the IPaddress of your printer for an LPD/LPR connection. For a non-network printer, create adesktop USB connection.Online Support Assistant at: www.xerox.com/office/VLC505supportTo Add the Printer Using BonjourTo add the printer using Bonjour®:1. From the computer Applications folder or from the dock, open System Preferences.2. Click Printers & Scanners.The list of printers appears on the left of the window.3. For the list of printers, click the Plus icon (+).4. At the top of the window, click the Default icon.5. Select your printer from the list, then click Add.NoteIf your printer is not detected, verify that the printer is powered on and that theEthernet cable is connected properly.To Add the Printer by Specifying the IP AddressTo add the printer by specifying the IP address:1. From the computer Applications folder or from the dock, open System Preferences.2. Click Printers & Scanners.The list of printers appears on the left of the window.3. Under the list of printers, click the Plus icon (+).4. Click IP.5. From the Protocol list, select the protocol.6. In the Address field, enter the IP address of the printer.7. In the Name field, enter a name for the printer.8. From the Use list, choose Select a driver to use.9. From the printer software list, select the print driver for your printer model.10. Click Add.2-27Xerox® VersaLink® C505 Multifunction PrinterUser GuideGetting Started
