10. For Side 2, measure the distance of the printed image from the top, bottom, left,and right edges.11. If the image is centered, no adjustment is required. If the image is not centered,adjust the paper registration. For details, refer to Performing a Color RegistrationAdjustment.Performing a Paper Registration Adjustment1. At the control panel, press the Home button.2. Log in as administrator. For details, refer to the System Administrator Guide atwww.xerox.com/office/VLC505docs.3. Touch Device > Support > Image Position.4. To adjust registration, select the source paper tray.a. Touch Paper Supply.b. Touch the desired tray.5. Using the chart printed in Verifying Paper Registration, select the side for registration.a. For adjusting Side 1, touch Adjusted Side, then touch Side 1.b. For adjusting Side 2, touch Adjusted Side, then touch Side 2.6. To adjust the registration, touch Lead/Side Registration.a. To adjust the side-to-side registration, for Side Registration, touch the Plusicon (+) or the Minus icon (-).b. To adjust the top-to-bottom registration, for Lead Registration, touch the Plusicon (+) or the Minus icon (-).For reference, position the chart so that Side-1 or Side-2 dots are at the bottomof the page.• For Lead Registration, a positive value shifts the image down the page.• For Side Registration, a positive value shifts the image to the left.Xerox® VersaLink® C505 Multifunction Printer7-14User GuideMaintenance
