Initial SetupWorkCentre 5300 Series Multifunction PrinterSystem Administrator Guide15Initial Setup at the Control PanelThe Installation WizardThe first time the printer is turned on, the Installation Wizard starts. The wizard prompts you with aseries of questions to help you configure basic settings for your printer. You are prompted to:• Select tools access setting.• Select units of measurement.• Select your local time zone.• Select NTP settings (optional).• Set the current date and time.• Configure Security, Email, LDAP and FAX (optional).Configuration ReportAfter you complete the installation wizard, you can print a Configuration Report. The ConfigurationReport lists the printer’s current settings. For details, see Accessing the Configuration Report onpage 17.System Administrator Access at the Control PanelTo configure the printer from the control panel, press the Machine Status button, then touch the Toolstab. If the printer is locked, log in as the system administrator.To log in as a system administrator:1. At the printer control panel, press the Log In/Out button.2. Type admin and touch Next.3. Type the administrator passcode and touch Enter. The default password is 1111.Locking or Unlocking the PrinterTo lock or unlock the printer:1. At the printer control panel, press Machine Status and touch the Tools tab2. Touch Authentication / Security Settings > System Administrator Settings > SystemAdministrators Login ID.3. Touch On to lock the printer or Off to unlock, then touch Save.
